|
At DrVanos.com we have addressed all the well known problems related to the U.S single vanos engines and provided solutions to those problems in a complete, ready to install kit. Each vanos is fully rebuilt using custom machine work to eliminate the dreaded rattling noises, and high performance seals and O-rings are installed to restore lost power and increase the life of the unit. Our vanos units will stand up to more abuse making them ideal for track cars, race cars, and forced induction applications. |
|
 The Stage I kit comes as a fully rebuilt vanos unit with modified bearings to eliminate the dreaded 'Vanos Rattle'. Every vanos also comes with new high performance Viton O-rings and Teflon seals installed to restore lost power and improve gas mileage... two solutions in one package! Don't settle for less than a fully rebuilt kit to solve both common vanos problems. Price: $350.00 (includes $100 refundable deposit)
|
 The Stage II kit adds REM coated cam gears and thrust washers which will further reduce chain noise and cut down on friction, allowing the vanos to work with less effort. This is a great upgrade for any car that sees more than the typical daily commute, and will stand up to the abuses of Auto-x and Club Racing or Forced Induction applications.
Price: $495.00 (includes $100 refundable deposit)
|
 LIMITED SUPPLY. The Stage III kit adds cam trays with honed bearing surfaces and REM coated S52 camshafts to reduce camshaft bearing friction to a minimum. Add a set of new lifters for $450 more.
Price: $1295.00 |
|
Additional Ordering Information |
|
We have created specialized installation documents for the Stage I and Stage II kits and offer tool kit rental as well. You can download the installation documents from the menu at the left. Instructions are in PDF format, so you will need Adobe Acrobat reader to view or print them. Tool kit rental is available with the purchase of a Stage I or Stage II kit, and includes the cam alignment blocks, crank locking pin and gear turning wrench. The rental cost is $30, plus a $120 deposit. The core charge allows us to send you a rebuilt vanos at a much lower price than a new unit would cost from the dealer. By sending out a complete, ready to install vanos the customer has the ability to replace their vanos as quickly as possible and then return their old vanos for the core refund. This helps to keep your downtime to a minimum so you can get back on the road without waiting for parts. The Stage I core charge is $100 (Vanos Only)
The Stage II core charge is $100 (Vanos, 3 Cam Gears and 2 Thrust Washers)We ask that you return your old vanos unit to us as quickly as possible. Once we receive your complete core we will immediately refund the full core charge amount back to your Paypal or credit card account. Cores must be complete and in working condition to receive a full refund. International shipping is available to most countries and the shipping options will be automatically available when you check out. Both standard and express options are available We accept all major credit cards, Paypal or Google Checkout. In addition we can take your credit card information over the phone if you prefer. Any core or tool deposit refunds will be applied back to your Paypal or credit card account for quick processing without any fees. |
|
Peake Research Engine Scan/Reset tool. Able to read fault codes, reset Check-Engine light, Service-Engine-Soon light, SRS, Oilservice and Inspection Lights.
- Displays BMW engine fault codes; Helps diagnose exactly what's wrong.
- Resets the "Check Engine/Service Engine Soon" Light.
- Resets the Oil Service and Inspection lights.
- Includes complete instructions, code booklet and storage case.
- Adaptor not needed in most cases. See application diagram below.
Price: $149.00 - $184.00
Click on the image below for application diagram.
|
 The tool kit rental includes cam locking blocks, cam gear wrench and flywheel locking pin. Rental fee is $30.
Price: $150.00 ($120 refunded when returned with core)
|
A common replacement item on high mileage cars. Easy to replace when doing the Stage II kit
Price:$59.00
|
Includes main gasket and spare plug hole gaskets. (seal washers sold separately below)
Price: $34.00
|
Complete set of 15 valve cover seal washers
Price: $19.00
|
Magnetic Oil Drain Plug - Catches magnetic particles in the oil pan as the engine wears over time.
Price: $7.00
|
 A common replacement item on high mileage cars. Highly recommended when doing the Stage II kit!
Price: $26.00
|
Newer style 2pc primary chain tensioner helps reduce chain noise on older models.
Price: From $99.00
|
Recommended if you have a 525i or a 325i with a build date of 4/95 or earlier. Includes 3 mounting studs, 2mm and 4mm thrust washer and spring plate.
Price: $99.00
|
 Mann OEM oil filter kit. Please enter model and year below before adding to cart.
Price: $8.00
|
Upgrade your plastic thermostat housing to an aluminum housing to prevent untimely failures. Includes gasket.
Price: $19.00
|
Used replacement solenoids, cleaned and tested to ensure they are working properly.
Price: $40.00
|
 OEM Camshaft position sensor
Price: From $79.00
|
'95 M3 uses Bosch FR7 LDC+/'96-99 M3 uses Bosch FGR8 KQE/325i-328i uses NGK BKR6EQUP
Price: From $29.00 Set of 6
|
|
|
|
|
|
